Finalize my selection 0

You have not selected a product

Retread Tire
X Line Grip D pre-mold retread image
X® Line Grip D Pre-Mold Retread
X Line Grip D pre-mold retread zoom
X® Line Grip D Pre-Mold Retread Zoom
/2

MICHELIN X® LINE GRIP D Pre-Mold Retread

Close
MICHELIN
X® LINE GRIP D Pre-Mold Retread
Select a size
back
Select a size
  • 445/50R22.5
  • 445/50R22.5
  • 455/55R22.5
  • 455/55R22.5
Close
MICHELIN
X® LINE GRIP D Pre-Mold Retread
Select a size
back
Select a size
  • 445/50R22.5
  • 445/50R22.5
  • 455/55R22.5
  • 455/55R22.5

WHAT IS A RETREAD / RECAP?

The X® LINE GRIP D Pre-Mold Retread utilizes Michelin Retread Technologies’ 9-step manufacturing process to ensure the retread, sometimes referred to as a recap, recapped tire or remold, meets new-tire manufacturing standards. By having your fleet’s tires retreaded or recapped, you can protect your bottom line and the planet by helping reduce the millions of tires that are discarded in landfills each year. Click here to find a Michelin Retread tire dealer near you.

WHY THIS RETREAD / RECAP?

The Michelin X® Line Grip D Pre-Mold retread is an all-weather, premium drive retread designed to optimize traction, mileage and fuel efficiency in line haul and regional highway applications.

  1. Incredible performance gains enabled by chevron tread design
  2. More efficient tread design allows the same rubber volume at 3/32 less tread depth than XDN2 for the new tire and 2/32 for the retread
  3. New compound provides great wear potential and lower rolling resistance
  4. Angled main grooves and full-life 3D Matrix siping provide grip throughout the life of the tire

 

BENEFITS AND FEATURES

Total Cost of Ownership 

  • New compound designed to break the compromise for long wear life, aggression resistance and fuel efficiency
  • Meets SmartWay standards for fleet fuel savings
  • Long wear life with casing protection from stone damage

 

Driver Confidence 

  • Compact tread design utilizing angled grooves designed to provide lasting traction in snowy and wet conditions
  • Same proven tread design as the Michelin X® Line Grip D tire

 

X Line Grip D pre-mold retread zoom

X® Line Grip D Pre-Mold Retread Zoom

REFERENCE MATERIALS - DOCUMENTS

X® LINE GRIP D Pre-Mold Retread / Recap Product Sheet

Michelin Retread Technologies, Inc. National Limited Warranty

Michelin Retread Technologies Quick Reference Tread Guide

Technical specification

445/50R22.5
375 mm
27 /32nds
16284
Technical specification

Technical specification

445/50R22.5
375 mm
27 /32nds
16284

Pre Mold Process
Also known as a "pre-cure" process. Tread rubber used in this process is molded and pre-cured by the tread rubber manufacturer, Michelin Retread Technologies (MRT). The appropriate tread is selected – design, width, thickness – and applied to a prepared casing. The casing is prepared by placing a cushion gum bonding layer between the tread and casing. The tire then moves to the chamber for curing.

Legal Footnotes

** Tread widths with two measurements have wings. The first number is tread base width in mm. The second number is the overall width, wing tip to tip.

You are using and outdated Web Browser.

You are using a browser that is not supported by this website. This means that some functionality may not work as intended. This may result in strange behaviors when browsing round.

Use or upgrade/install one of the following browsers to take full advantage of this website

Firefox 78+
Edge 18+
Chrome 72+
Safari 12+
Opera 71+