MICHELIN XDR 3
MICHELIN XDR 3
/1

MICHELIN XDR® 3

Close
MICHELIN
XDR® 3
Select a size
Back
Select a size
  • 27.00R49 E4*** B4 TL
  • 27.00R49 E4*** A TL
  • 27.00R49 E4*** B TL
  • 33.00R51 E4** B4 TL
  • 33.00R51 E4** C4 TL
  • 33.00R51 E4** B TL
  • 37.00R57 E4** B4 TL
  • 37.00R57 E4** C TL
  • 37.00R57 E4** C4 TL
  • 37.00R57 E4** B TL
  • 40.00R57 E4** MB TL
  • 40.00R57 E4** MC4 TL
  • 40.00R57 E4** MC TL
  • 50/90R57 E4** MC4 TL
  • 53/80R63 E4** MC4 TL
  • 53/80R63 E4** MB TL
  • 53/80R63 E4** MC TL
  • 59/80R63 E4** MC4 TL
Close
MICHELIN
XDR® 3
Select a size
Back
Select a size
  • 27.00R49 E4*** B4 TL
  • 27.00R49 E4*** A TL
  • 27.00R49 E4*** B TL
  • 33.00R51 E4** B4 TL
  • 33.00R51 E4** C4 TL
  • 33.00R51 E4** B TL
  • 37.00R57 E4** B4 TL
  • 37.00R57 E4** C TL
  • 37.00R57 E4** C4 TL
  • 37.00R57 E4** B TL
  • 40.00R57 E4** MB TL
  • 40.00R57 E4** MC4 TL
  • 40.00R57 E4** MC TL
  • 50/90R57 E4** MC4 TL
  • 53/80R63 E4** MC4 TL
  • 53/80R63 E4** MB TL
  • 53/80R63 E4** MC TL
  • 59/80R63 E4** MC4 TL

The MICHELIN XDR 3 in action:

MASTER XDR3 - Master in English - Full version 1080p


WHY CHOOSE THIS TIRE?

A new design:

A larger proportion of rubber is always in contact with the ground, which improves wear.

Better distribution of the load over the entire contact area reduces the contact pressure and thus the wear rate.

The interlocking rubber blocks on the shoulder create a firmer tread pattern when cornering, which reduces the rate of wear.

Better endurance due to improved heat dissipation capabilities.

Better resistance to damage thanks to a slower rate of wear. The amount of rubber lasts longer.

MICHELIN Edito xdr3 tread Tire

New rubber compounds:

Exclusive new mixing process.

The mixture is a lot more uniform which gives a reduced rate of wear.

Higher level of carbon black dispersion, which improves wear resistance.

MICHELIN Picto xdr3 compounds Tire

Anti-corrosion cables

The steel integrated into the rubber prevents the spread of corrosion for greater robustness.

Stronger steel inside the cable.

MICHELIN Picto xdr3 cables Tire

Exceptional lifespan

Service life increased by a minimum of 8 to 10 %. (1) (2) (3) (4) (5)

MICHELIN Edito xdr3 vehicle small Tire

REFERENCE MATERIALS - DOCUMENTS

MICHELIN® XDR® 3 Product Sheet

Commercial Warranty

RELATED SERVICES AND SOLUTIONS

MICHELIN MEMS solutions : TPMS for rigid dumper trucks

Easily monitor your mine and quarry vehicles' tire temperature and pressure.

Thanks to innovative MICHELIN MEMS technology, ensure you get the best performance from your tires by improving productivity, employee and site safety and reduced downtime.

MICHELIN Consulting and Services : increase your productivity of your mining site

Request tailored recommendations to increase your site productivity.

Need to reduce your operational cost, increase tire life, or load of your vehicle while ensuring safety of your staff? Our expert team is available to identify the best improvement areas for YOUR site.

Tech Specs

MICHELIN XDR3 - 27.00R49
2730 mm / 107 inch
730 mm / 29 inch
1235 mm
49
8257
90 mm / 3.5/32 nds
B4
1390 kg / 3064 lbs
19.50/4.0 [3.2]
19.50/4.0 [2.7]
E-4
528
730 mm / 29 inch
892 mm / 35.12 inch
395114

Pressure (bar and psi) & Load (kg and lbs)

Factor the load and type of work when adjusting tire pressure**

bar

psi

3.5

51

4

58

4.5

65

5

73

5.5

80

6

87

6.5

94

7

102

7.5

109

8

116

(kg - lbs) Transport load per tire <= 27.25 t

Standard

16850

37148

18550

40896

20300

44754

22050

48612

24000

52911

25500

56218

27250

60076

(kg - lbs) Transport load per tire > 27.25 t

Standard

29000

63934

30000

66139

32100

70768

**IMPORTANT

The inflation pressure must always be appropriate for the load per tire, the speed of travel and the work to be done. Our recommendations above are provided subject to changes

Technical data is subject to change without prior notice.

Legal Footnotes

1 Vs. MICHELIN® XDR® 2 tire, all sizes.

2 Projected improvement in tire life based on wear rate improvements based on new MB4/MC4 tread compounds and on field performance in 14 customer mine sites over 29 months comparing the tread pattern of the MICHELIN® XDR® tire (on predecessor and prototype tires) to the tread pattern of the MICHELIN® XDR® 2 and MICHELIN® XDR® tires. Additional improvements in tread cuts and tread fatigue anticipated because of 17 degrees F lower tread operating temperature and
corrosion-isolating cables. Actual results may vary.

3 Compared to MICHELIN® XDR® 2 33.00 R 51, average performance by mine site. Projected improvement in tire life based on field performance in customer mine sites over 29 months of the MICHELIN® XDR® 2, MICHELIN® XDR® 250 and MICHELIN® XP 57, 40.00 R 57 and 53/80 R 63, tires that included individual design improvements incorporated into the MICHELIN® XDR® 3.

4 Compared to MICHELIN® XDR® 2 50/90R57, average performance by mine site. Projected improvement in tire life based on field performance in customer mine sites over 29 months of the MICHELIN® XDR® 2, MICHELIN® XDR® 250 and MICHELIN® XP 57, 40.00 R 57 and 53/80 R 63, tires that included individual design improvements incorporated into the MICHELIN® XDR® 3.

5 Compared to the MICHELIN® XDR® 2 37.00R57 tire, average performance by mine site. Projected improvement in tire life based on field performance in customer mine sites over 29 months of the MICHELIN® XDR® 2, MICHELIN® XDR® 250 and MICHELIN® XP 57, 40.00R57 and 53/80R63 tires that included individual design improvements incorporated into the MICHELIN® XDR® 3 tire. Actual results may vary.

6 Without any compromise on TKPH/TMPH.

You are using and outdated Web Browser.

You are using a browser that is not supported by this website. This means that some functionality may not work as intended. This may result in strange behaviors when browsing round.

Use or upgrade/install one of the following browsers to take full advantage of this website

Firefox 78+
Edge 18+
Chrome 72+
Safari 12+
Opera 71+